Handgun Forum banner

1 - 20 of 202 Posts

·
Super Moderator
Joined
·
12,333 Posts
Discussion Starter · #1 · (Edited)
Post your S&W pics here to show off :) Semi Autos or Revolvers

(By putting them here, it makes it easier for new members to find pics of something if they are interested in a certain model)



 

·
Registered
Joined
·
201 Posts
Smith & Wesson

the Model 19-4 4" .357 Magnum revolver. Blue Steel, this one made in 1979



one of the best revolvers ever made. Model 17-3 K22 .22 LR revolver.



The next is a semi Auto model 52 that uses the .38 special flush wad cutter round. A very accurate pistol.

 

·
Registered
Joined
·
201 Posts
S&W Definative Pictures

The Definative Smith & Wesson is the Military & Police Model Made from 1899 until the present. This Fixed sight revolver found a welcome place in holsters of Police, Military, hunters, adventurers all over the world. Well over5 million revolvers were made with the vast majority in 38 special with 4" barrels But they can be found in 38 special, 38 long Colt, 38 S&W, 32-20 winchester, 357 Magnum, 32 S&W long, 9 MM luger and 22 long rifle. Barrels range from 6 1/2", 6", 5", 4", 3" and 2" Thay may be Blue steel, Blue Aluminum/ Steel comb. Nickel in either of the former or Stainless steel.

this is a model 64 in 38 special with light or pencil barrel. Prior to 1957 all were simply called M&P revolvers but In 1957 the S&W revolvers were assigned model numbers Model 10 for 38 Special Steel,Model 12 Alum/steel, Model 13 .357 Magnum, model 64 .38 Special Stainless, model 65 .357 mag. Stainless, model 547 in 9mm steel.
 

·
Registered
Joined
·
2,353 Posts


Two year old 686 that I wouldn't trade for anything in the world.
 

·
Registered
Joined
·
23 Posts
Charlie said:
Where's all the big S & W roll marks?
I got rid of them and the front serrations - look at the slide carefully and you will notice a definitive Browning Hi-Power like cut on it (where the serrations used to be). it is modified functionally and cosmetically.

serration and SW logo removed
EGW waffer bushing cut to the profile of the slide
Barrel cut to the length of the bushing and re-crowned
STI modular trigger
S and A one piece magwell - polished and dehorned
all internal parts replaced
C and S 4.5lb trigger group
Wilson bullet proof thumb safety and slide stop
Wilson firing pin block
 

·
Registered
Joined
·
2,839 Posts
Oh yeah, I see. I think that looks great. I've got a Springy that I would love to lose the front serations on. Where can one get that done and what kinda' money are we looking at? (it's stainless).:smt028
 

·
Registered
Joined
·
23 Posts
Charlie said:
Oh yeah, I see. I think that looks great. I've got a Springy that I would love to lose the front serations on. Where can one get that done and what kinda' money are we looking at? (it's stainless).:smt028
the cost wasn't that much - it's done with a machine. with the cut and the refinish should not run more than eighty to hundred bucks. you need to check with a reputable gun shop who employs a locally reputable gun smith. the smith should be able to tell you whether he/she has any access to a machine shop that can handle such a project. if not, there are a number of well known custom shops that can handle that project. good luck.
 

·
Registered
Joined
·
2,839 Posts
We don't have anybody local that can do anything like that (pretty rural). I'll check around on the internet since I have to send it off anyway. Thanks for the info.:mrgreen:
 

·
Registered
Joined
·
6,740 Posts
Smiths for Now.

Right now I have only five. Hope to get a few more.

Model 19-4 .357 and model 21-4 .44spl.


S&W 1911/.45 SC-PD Commander 41/4" barrel.


S&W 1911/.45 SS Government 5" barrel.


S&W .40VE Sigma
 

·
Registered
Joined
·
201 Posts
S&W Definative Pictures

Here is a S&W New Departure, Safety Hammerles, or Lemon Squeezer .38 DAO revolver 5 th model manufactured in 1923 this model was made in 5 variations from1887 to 1940 with over 261000 being made. note the covered hammer and the safety bar along the back strap of the frame. This one is blued with wood grips but the majority are nickle plated with hard rubber grips.

 
1 - 20 of 202 Posts
Top