[ronmail65]

I've been jonesing for a CZ75BD for a while now, but now that I'm coming close to getting one I'm thinking that I may be happier with a Beretta 92FS.

I've shot both and I don't have a strong preference either way. Both seem like very reliable guns, are classic 9mm designs, and have great track records. I really like a de-cocking feature, I'm a left handed shooter (ambi features preferred, but not necessary), I don't want to spend more than $700 (less is better), and I'd like to get a stainless gun. The Beretta 92FS Inox seems to meet all of my requirements, but there is no CZ model that covers all these bases so I'd have to sacrifice somewhere. Hence, I'm seriously considering the Beretta.

I don't think I can go wrong either way, but I can only choose 1 of them. Are there any special considerations or quirks about these 2 guns that I should consider before making a final decision? Opinions requested... thanks!

 

[clockworkjon]

I was faced with the exact (minus the stainless) decision a year ago. My choice....an M&P 9! But I was leaning Beretta before that. More comfortable controls.

 

[ronmail65]

I was faced with the exact (minus the stainless) decision a year ago. My choice....an M&P 9! But I was leaning Beretta before that. More comfortable controls.

The M&P is similar to the Glock design, which I already have. I'm actually looking for a double/single action design semi-auto and this is what I've narrowed it down to.

 

[Overkill0084]

I can't speak to the Beretta. I suspect it's a pretty nice pistol. However, my only Beretta product is unrelated to the M-9 and it's relatives.
I do, however own a CZ75BD. It has been 100% reliable with any ammo that I've fed it, including some of my early reloads. It's accurate and very comfortable to shoot. Purchased new, expect that the trigger will be less than wonderful. They are bit "crunchy" at first. A couple hundred rounds will settle it in nicely. I'd buy it again knowing what I know now.
CZ75B is available in stainless, the 57BD is only available in black. (last time I checked)
FWIW, I replaced the rear site with an adjustable and put some CZ walnut grip panels on it. Those grip panels it ships with may be great for a service weapon, but they are just horrible to look at.
I don't know if you would be interested, but the CZ Kadet Kit fits nicely and is very well executed, if you were to want one. Accurate and reliable.

 

[recoilguy]

The CZ is a great gun but the stainless verson does not decock. Too bad because CZ is a wonderful weapon in my opinion.


RCG

 

[berettabone]

I would go with Beretta every time.........

 

[ronmail65]

Two questions on the Baretta...

So I found a Beretta at a LGS that will cost me $770 plus tax. It's a new 92FS Inox stainless with 2 mags, case, etc... Online, I don't see many available but the ones I do see are around $700, but by the time I pay shipping and FFL fees I'll be close $750 or more. I guess the $770 seems like a decent price -- what do you think?

Secondly, I did think the DA pull was pretty heavy -- heavier than I had experienced on other broken-in 92FS that I had shot previously. Is the heavy DA pull a break-in issue, or are they typically always quite heavy?

 

[denner]

Yes, the main spring will break-in after dry-firing/range time.

 

[fast20]

just know i love my beretta m9....

 

[Hurryin' Hoosier]

Same here. That's probably the only gun I own that's on the "not for sale or trade" list.

 

[berettabone]

All guns have a break in period.............some more time than others..personally, I don't feel that the da pull on my 96 is that heavy........

 

[ronmail65]

Modifying my options a little bit... a CZ P01 Compact

Okay... so throwing another gun into the mix... on the CZ Custom website it appears that I can get an "Omega" which seems just like the P-01 Compact that comes with an ambi-decocker.

This option is attractive to me because...
- It's a CZ -- I really like what I read and hear about CZs.
- I like the size, weight, and features.
- I like the price point.

What concerns me is the trigger pull -- there's a YouTube review on the P-01 that demonstrates a lot of travel and some heaviness which doesn't appear to improve with break-in. And, it's not available in stainless... which would be nice. Not a concern really, just a mild disapointment.

Any thoughts on the P-01, this "Omega" option, or the CZ Custom website?

 

[recoilguy]

I own more then one CZ. The P-01 is my favorite gun and in my IWB holster as I type this. It is as accurate and solid a weapon as I have held. It is my favorite handgun. There is a you tube video about anything if you look hard enough. If I were so inclined to make a you tube video it would be something short of a commercial for what a great gun the P-01 is. The trigger has some creep, not any more thenmost weapons under 1200 bucks and certianly not annoying in the least. It does smooth itself out quickly. I own many weapons many brands, the P-01 is a great shooter. Before the trigger pulls concerns you shoot the gun, then it most likely will not. I can not make a garantee because i am not fimiliar with what you are accustom too.

I always suggest CZ because of the very good experiances I have had with the brand and I always suggest P-01 because of the versitility and accuracy that is in herant to the design. good luck

RCG

If you want stainless you may just have to get the 75 compact as opposed to the P-01 It does come in a stainless version. I own one of those guns as well and am very happy with it!

The P-02 which is the gun you are talking about with the Omega trigger is not in stock at CZcustom. The Omega trigger is not the same trigger as the P-01.

 

[ronmail65]

I own more then one CZ. The P-01 is my favorite gun and in my IWB holster as I type this. It is as accurate and solid a weapon as I have held. It is my favorite handgun. There is a you tube video about anything if you look hard enough. If I were so inclined to make a you tube video it would be something short of a commercial for what a great gun the P-01 is. The trigger has some creep, not any more thenmost weapons under 1200 bucks and certianly not annoying in the least. It does smooth itself out quickly. I own many weapons many brands, the P-01 is a great shooter. Before the trigger pulls concerns you shoot the gun, then it most likely will not. I can not make a garantee because i am not fimiliar with what you are accustom too.

I always suggest CZ because of the very good experiances I have had with the brand and I always suggest P-01 because of the versitility and accuracy that is in herant to the design. good luck

RCG

If you want stainless you may just have to get the 75 compact as opposed to the P-01 It does come in a stainless version. I own one of those guns as well and am very happy with it!

The P-02 which is the gun you are talking about with the Omega trigger is not in stock at CZcustom. The Omega trigger is not the same trigger as the P-01.

Great info and endorsement! Thank you for the info.

I actually spoke with the guys at CZ Custom. They tell me that the differences between the Omega and the P-01 are 1) the Omega has a newer and different trigger design, and 2) the Omega has the ambi-dexterous and swappable manual safety and decocker levers. They guy I spoke with also made a great point about the ambi-decocker; basically that the decocker is not an "on demand" feature of a gun needed for quick and immediate access, such as a manual safety or even a mag release. Although an ambi-decocker is convenient for a lefty, I agree with what he said and I'm convinced it's not a necessity for me. So, I'm back to considering the P-01 instead of the Omega.

I prefer the decocker to a safety -- particularly if I'm going to carry. The idea of stainless is not gonna happen for me with a CZ; there is no combination of stainless and decocker. I have shot a full size P-01 with a decocker at my local range and it had a good trigger. My experience is contrary to the YouTube video I saw, so my trigger concerns are probably unwarranted.

All things considered, I may very well go for the P-01. I have been very interested in getting a CZ for a year now and the time seems right.

On last question... about holsters. I have a Serpa Nighthawk paddle holster that I use with my Glock 19 and it is awesome! Is there anything similar (or same) that you could recommend for the P-01? I like the idea of an IWB holster, but I find them extremely uncomfortable -- unless you have a recommendation that might sway me.

 

[firemanjones]

I own three Berettas and they are all fine guns. They have the decocker and safety which I like. I was looking at an Inox today but passed, I like the black ones better and can't see paying more for the Inox. The Berettas can have a D spring installed to make the trigger pull lighter just for a few $'s. My advise is Beretta hands down!!!

 

[thx1970]

Im kinda sold on CZ they just feel better in the hand and its been dependable since day one.

 

[scooter]

Having grown up on the 1911 I have both a RAMI and a TZ 75 (CZ clone) and both can be carried cocked and locked so no matter which of my autos I carry there is no confusion.
I can use the SA/DA guns fairly well but prefer C&L . So I would vote for the CZ (if it still can be C&L)

 

[dondavis3]

While I like my CZ's -

My CZ 85 Combat

I love my Sig Sauers

a couple of mine.

Sig P226 X5

Sig P229

:smt1099

 

[FNISHR]

The x5 is truly a thing of beauty.

 

[dondavis3]

@ FNISHR

Thank you.

:smt1099