Handgun Forum banner

Breech

1K views 4 replies 5 participants last post by  Higgy Baby 
#1 ·
I Have a S&W SD40 VE that jams as loading..my question is can I sand Breech down a little to solve this issue? And if so what sandpaper? I have up to 2500 grit..
 
#2 ·
I wouldn’t sand it. Maybe polish. But sanding could change headspace slightly. Other things to check would be the extractor hook for any burrs or sharp edges on the underside, which could be causing rounds to hang up. Lightly sanding those surfaces of the extractor may make a difference, and if you mess that up it is a cheaper part to replace. Also make sure the extractor isn’t binding and that the spring and plunger for the extractor are moving as well.

I would definitely do all of the small parts inspecting and addressing before doing anything to the slide itself.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top