Handgun Forum banner
px4
1-13 of 13 Results
  1. General Gunsmithing & Other Tips
    I have a PX4 Compact 9MM, like the gun, shoots well. When I get a new firearm, I always put together a 'parts kit'. Recoil spring first along with a firing pin spring. I shoot a lot, maybe not by some standards but will go thru 4-5000 rounds a year, I reload. (FYI 9's are so cheap right now it...
  2. Beretta Gunsmithing
    Does anyone know if the px4 high cap mag will also work in a stoeger cougar( prequel to px4)
  3. General Semi-Auto
    I recently bought a Full-size Px4 9mm, and my 2nd trip to the range I have encountered an issue: The gun fires reliably time after time, until it gets to the final round of the magazine. Consistently, the final round of the magazine seems to feed into the chamber, but when the slide comes back...
  4. General Semi-Auto
    Hey guys, My gf's got a Beretta PX4 Storm Subcompact in 9mm. I've never had experience with Berettas. I'm mainly a Glock guy. I'm shopping for some accessories for her for Christmas for her Beretta and her Sig P238. I went to the Beretta site and I was surprised to see her PX4 Storm...
  5. Beretta
    Hey guys, I just got my 20 round extension spring for my px4 9mm and I have some questions on the installation. I removed my 17 round mag and installed the 20 round extension spring, however do I reuse the 17 round locking plate? Reason why im asking is because it doesn't seem to fit into the 20...
  6. Beretta
    Today I purchased my first gun, the Beretta PX4 Storm. I've been looking online trying to find out where I can purchase a stainless steel slide but I've came to a dead end. There really isn't too much I can find for this gun, and I was hoping someone knew where I could get one. I did read...
  7. Beretta
    Hey was tryin to get info about different light options for my px4 subcompact. Anyone have any and if so what do you like and don't like about them? And the type ya have! Any info would be awesome, im a first time buyer and got it for home defense, and it would be pointless if i couldnt see at...
  8. Beretta
    The extractor roll pin in my full size PX4 Storm is messed up from the previous owner. I was just wondering if anyone knows exactly what size punch to use to remove the old one and install a new one. The punch set I have is metric, so if you know the metric size, that would be appreciated. If...
  9. Beretta
    I am curious if any one has replaced their .40 barrel with a 9mm. they sell for 230$ and I might just buy a new gun for that price, but I would really like to stick with my gun. I am also wondering how to go about shortening the trigger pull. I have looked through threads and threads and must...
  10. Beretta
    Greetings all.. New to the forum, have a question.. I have a brand new Px4 (only about 50 rounds thru it) While I was practicing some rack and loads with snap caps, after pulling back the hammer into SA mode, there's a light "scratch" or "grind" feel in the first mm or two in the trigger pull...
  11. Beretta
    The other night my family and I were awaken by a very loud crash within our home. I immediately grabbed my PX4 .40 from my safe and began to investigate. Thankfully, the loud crash was the result of my daughter's bath time toys falling when the suction cups of the basket which holds them...
  12. Beretta
    Hey all. I'm narrowing down the list for the new pistol I'm going to get. The main finalist is the PX4 .45 F. Could anyone who owns a PX4 in .45 (or use to own one) give me your opinion on it, good or bad? Everyone seems pretty keen on this gun, with surprisingly few issues, that my research...
  13. Handgun Forum Introductions
    I just purchased a Beretta px4 storm, 40s/w handgun. I am excited to be a part of this forum and look forward to learning more. thanks thebakers .com link removed
1-13 of 13 Results
Top