Handgun Forum banner

beretta

  1. Beretta
    Fellow gun collectors, For the better parts of the past 3 years I've been working on brining the locking blocks for the Beretta 1951 and Helwan variants back to life. It has been a long journy but I'm very proud of the results. It all started 3 years ago with sourcing two locking blocks, this...
  2. Handgun Classifieds
    A handmade miniature. Scale: 1: 5 Caliber: 2mm Price: 150$ It's made of nickel-based metal which is close to weapon steel when it comes to hardness characteristics but unlike steel it is corrosion-resistant. The handle is decorated with beautiful yellow metal cheeks. Buying the gun you get 10...
  3. Beretta
    I just acquired a 94 model 92G Centurion with trijicon night sights (dim to can't see at night) with one mag and original grips that have some wear. It is in overall good condition for its age and doesn't appear as if it has seen 1000's of rounds in it's life. Not a safe queen by any stretch...
  4. Beretta
    I purchased a Beretta 92S from Classic Firearms and I seem to be having an issue i've seen reported by several other people. The disassembly latch will only rotate part of the way before meeting tough resistance. It seems to only be liberated by a firm strike with a dowel and small hammer...
  5. Beretta
    Hello, I was at the range today, and after I had shot about 3 clips through it, I had put a full clip back in it, hit the slide release, and the safety was on, then I switched it off, and the trigger pulled freely as if the safety was on. Then after I switched the safety on and off a bit...
  6. Beretta Gunsmithing
    I just bought a Beretta Nano and I'm having the FTE (Failure To Extract) problem. I went on YouTube and figured it may be the 115 gr. ammo I was shooting and lo and behold when I shot Remington 147 gr. ammo, I did not have any FTE. I also tried 124 gr. ammo and had FTE problems about as bad as...
  7. Handgun Classifieds
    Hello, I am looking to buy a Beretta 92FS Vertec Inox. Please contact me if you have one for sale. Thanks.
  8. Beretta
    hello, When shooting my Beretta m92fs the slide locks back like it should when it is empty but it does this when there is still one round left in the mag. Does anyone know what causes this and if there are any fixes. Im very new to the m92fs platform. Thank you, Bronco
  9. Beretta
    Hello my friends, I'm working for a museum and they have this olympic model pistol, dated from 1951, but I don't know it's eactly model. It is writen on the frame: "Pistola Aut. 22 Corto Tipo Olimpionico / Pietro Beretta - Gardone VT Italia" But I don't know its model, it seems like a 949...
  10. Beretta
    Hey all, just wanted to share my thoughts on the M9A3. I've been a fan of the M9/92 series of pistols for a long time. I never bought one because of the original grip. The width, and the swell in the back just never worked well for me. When I first saw the new A3 model, I noticed a big change...
  11. General Semi-Auto
    I recently bought a Full-size Px4 9mm, and my 2nd trip to the range I have encountered an issue: The gun fires reliably time after time, until it gets to the final round of the magazine. Consistently, the final round of the magazine seems to feed into the chamber, but when the slide comes back...
  12. Beretta
    Hey folks. So I've been looking for a good carry holster and seems all the ones I'm finding don't accommodate the rail on the A1. Well that is unless I want to go tactical and have a thigh holster. Luckily I work at a gun shop and have access to lots of options to play around with. And I found...
  13. Beretta
    Hi!! I have been using a Beretta 96 Brigadier Elite 2 as my primary conceal carry gun and was thinking of changing. I love the gun but it is heavy for an everyday carry gun. I was considering selling my Elite 2 to purchase something else but I cannot find any concrete values on 96 Brigadier...
  14. Beretta
    Hey, I have an 84FS and I was looking for narrower grips. Anyone know of any that will give my Cheetah a narrower profile? Thanks!
  15. Beretta
    I purchased a used Beretta Px4 Storm Compact and love this semi-auto handgun in 9mm, and while cleaning it, misplaced the locking block and assembly (no idea how!). I ordered a new replacement locking block and locking block assembly and it does not fit! The replacement locking block is...
  16. Handgun Classifieds
    I am looking for commemorative pistols with gold leaf where available, walnut cases and low or no usage. Please send photos, details such as 9mm or 40 caliber and pricing: USMC Beretta Commemorative Pistol with gold Leaf Beretta M9 Navy Commemorative Editionwith gold/leaf US Army with gold leaf...
  17. Beretta
    Received a 92FS Compact for Christmas and I'd like to replace the factory grips with something thinner, if possible. Does anyone know of a grip manufacturer that makes thin grips for the Compact? I've found some for the full-size but nothing confirmed for the Compact.
  18. Beretta Photo Gallery
    I just recently purchased a new Beretta Px4 Storm Inox 9mm Full Size. Beautiful gun and very well balanced in the hand. I'm over 6 foot and the Px4 fits me like a glove using the medium size back strap. Only one dealer at the local show had the Inox version, which in my opinion is very striking...
  19. Beretta Gunsmithing
    Good day all, I just purchased my first gun after a fair amount of research. So yes, I'm a 58 yr old virgin owner. I admit from my Boy Scout merit badge days to now, have committed adultery with friends of competition caliber and others that could stand their ground with the best. I will say...
  20. Handgun Forum Introductions
    Hello. I just joined the forum. My first handgun is a Beretta 9000S (added to my long list of long guns). Bought it used, I am the third owner of the handgun. I have heard everything from "it feels like you're holding a 4" long piece of a metal 2" x 4"" to its the best handgun ever (I think...
Top