Very nice! There are worse problems to have, after all!
Stingers in a P22?
Can the Stinger ammo be used in the Walther P22?
I know fella's at the range who use Stingers & Mini Mags without a problem.
Me, I'm a cheap SOB () and only use CCI Blaser.
I was thinking of getting the P22 but read all the pro/con here and was not sure.
However after seeing your post, now I am sure I will get one. I got to shoot 200+ rounds last weekend with one of these and I really liked it.
Last edited by KenK; 04-12-2009 at 02:47 PM.
Last edited by fusil; 04-13-2009 at 03:47 PM.
Reason: ooops spullingg
it's a great little gun, but if you take off the slide and look at bottom of it, slide grooves, at the little hump part on both sides toward the rear of the slide, you might see small chunks of metal are missing.
There is a trigger bar that connects trigger and hammer, and it has two little dog ears that poke out and ride in the grooves of the slide... they are stamped steel and usually have sharp edges from the factory, and since the slide is pot metal and not steel, the sharp edges of the dog ears can take chunks out of the slide.
Radical solution? Take gun apart, get buffing wheel for dremel tool and polish off those sharp edges on the trigger bar ears. I did.
Love my P22. Put a laser on it, adjusted to cross beam and bullet at 20 feet, ready for anything..
but if you don't polish the sharp edges off the ears, your slide could continue to get chopped up and eventually might crack. Not expensive parts here. Great design, but parts are low cost. Gotta make sure they will work smoothly together.
I know, crazy to have to mess with a gun straight from factory, but this is one of many good ideas to help the p22 last and work better.
Search tags for this page
p22 laser problem
wather p22 laser problems
Click on a term to search for related topics.
» Springfield Armory
» HGF Sponsors