PT111 Millenium trigger pull
I am new to the forum. I just ran across it the other day. I was very excited to see that there was a forum specifically for Taurus firearms! I am a huge fan of Taurus. I have a PT111 and a Model 627 Total Titanium revolver. Anyhoo...
My first question is in regards to getting a slightly lighter trigger pull out of my PT111. I have had the gun apart several times and I see that the weight of the trigger pull is governed by the strength of the firing pin spring. Is there anything I could do to lighten the spring. I realize that a great deal of care needs to be taken here as too light a spring could cause the cartridge to not discharge. I have polished all the bearing surfaces and that helped smooth out the slightly gritty feel I had when I bought the gun (I got it new about 4 years ago).
I also have another question...is there a spring kit available for my 627 to fine tune it? I have looked around the internet some, but haven't been able to find anything. Thanks for all the help.
PT 111 Millenium Pro trigger pull
Hi. Here's what I've learned about trigger pull on the PT 111.
The firing pin spring is just strong enough to fire the primer. The firing pin spring establishes the trigger pull. I have fired thousands of rounds through a DA pistol. This isn't too bad, just takes some getting used to. Just make sure the mechanism is clean and properly lubricated. If it's gritty or fouled better let a gunsmith look at it, or worse ( because of the time lag), let Taurus fix it.
I like this gun for a carry.