Results 1 to 9 of 9

Thread: XD VS. XD(m) ?

  1. #1
    wpshooter is offline Member
    Join Date
    Sep 2008
    Posts
    116

    XD VS. XD(m) ?

    Are the "improvements"/M factor that is included with the XD(m) models of the Springfield Armory pistols sufficient reason to only consider purchasing the XD(m) and to not consider the purchase of the older XD models, i.e. should one seriously not consider purchasing the XD and instead only consider purchasing the XD(m) models ?

    The 2 guns that I am considering are either the XD tactical in 9mm or the XD(m) 4 1/2 inch model in 9mm. Should I eliminate the XD tactical from consideration and go directly for the XD(m) or is this just strictly a toss up or matter of personal taste ?

    Thanks.

  2. #2
    Popeye's Avatar
    Popeye is offline Junior Member
    Join Date
    May 2010
    Posts
    52
    I got the XD9 Tactical 16+1 with 5 inch bbl and XD gear. Next to it was the XDM 19+1 and Match Grade bbl for a few $ more.

    Since I do not shoot competition anymore, the XD9 with gear was fine for me, but I had to buy the 3rd mag [$30] since it only came with 2.

    If you are not on a budget, the XDM is a little more accurate and 'possibly' a better investment. That 19+1 on the 9mm XDM is tempting, but so is the .45 cal ....

  3. #3
    cmaki413's Avatar
    cmaki413 is offline Junior Member
    Join Date
    Feb 2010
    Posts
    50
    Are they going to make a .45 XDm???

  4. #4
    Bisley's Avatar
    Bisley is offline Senior Member
    Join Date
    Aug 2008
    Location
    East Texas
    Posts
    1,433
    Quote Originally Posted by cmaki413 View Post
    Are they going to make a .45 XDm???
    Yes, it is in production, now.

    The XDm is a slight improvement, in my opinion, but not enough so to make me trade my XD45 for one. Mine is an outstanding shooter with a nice trigger, and don't 'fix' things that aren't broken.

    Now, if they should someday decide to come out with an XDm45 compact, I might pick one up. The only knock I have against the XD standard model is that the long grip prints a little bit through a light colored tee shirt. The compact model has a grip that is enough shorter that it should help with that problem.

  5. #5
    Freedom1911's Avatar
    Freedom1911 is offline Member
    Join Date
    Oct 2009
    Location
    Missouri
    Posts
    622
    I have the XD9mm and the XDM9mm and in all honesty the only reason to seriously consider the XDM over the XD is the magazine capacity.

    If I were you I would buy the XD9mm and buy the 18 round mags from MECGAR.
    They work perfectly every bit as good as the OEM 16 round mags from Springfield, and they are only maybe less than a quarter inch longer. If the extra rounds don't matter to you. Then save the cash and get the XD.
    The XDM looks cooler and holds more ammo. The improved barrel is not so improved that it makes the cost worth it.
    At least thats my opinion.

  6. #6
    cmaki413's Avatar
    cmaki413 is offline Junior Member
    Join Date
    Feb 2010
    Posts
    50
    Thanks Bisley. I'm looking at xds and Xd(m)s, and am in the "caliber war" stage. The cheapness and availabiltiy of the 9mm is nice, but I'm a sucker for big holes. Also, I've shot a 9mm xd, and a .45 in a 1911. Is the .45 way harsher in the xd then it is in the 1911??

  7. #7
    TOF's Avatar
    TOF
    TOF is offline Senior Member
    Join Date
    Sep 2006
    Location
    Northern Arizona
    Posts
    3,015
    I see the fit in hand as the most important difference. If you have a large hand either works well. If your hand is on the medium to small side the XDM would probably be a better choice. I had an XD40 Tactical that didn't work well with my medium size hand. After around 120 rounds my thumb knuckle would begin to drip blood. I sold it before the M series came out and purchased an M&P40. I could go through several hundred rounds without bleeding when using the M&P.

    Good luck whatever you get.

  8. #8
    Bisley's Avatar
    Bisley is offline Senior Member
    Join Date
    Aug 2008
    Location
    East Texas
    Posts
    1,433
    Quote Originally Posted by cmaki413 View Post
    Thanks Bisley. I'm looking at xds and Xd(m)s, and am in the "caliber war" stage. The cheapness and availabiltiy of the 9mm is nice, but I'm a sucker for big holes. Also, I've shot a 9mm xd, and a .45 in a 1911. Is the .45 way harsher in the xd then it is in the 1911??
    The XD45 is not harsh at all, in my opinion. It has a strong, but gentle push, rather than a muzzle flip, like you get with a higher pressure round like .40 S&W. It is very easy to come back on target, with a proper grip.

  9. #9
    Popeye's Avatar
    Popeye is offline Junior Member
    Join Date
    May 2010
    Posts
    52
    When I got my XD9 Tactical [5 in bbl], I soon regretted not getting the XDM with the Match bbl & 19+1 capacity... after a couple months, I just regretted not going with the .45 acp.
    I ended up selling my XD9 to get a CCW type .45acp since I don't target shoot very much, anymore... just enough to stay in practice.
    My thinking, from experience, is the least rounds in a BG, the better.

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

springfield armory xd vs xd compact
,

springfield xd vs

,
springfield xd vs springfield xd-m
,
the m factor springfield
,

the m factor xd

,
xd forum
,
xd m
,
xd m verses the xd
,

xd springfield forums

,

xd vs xd type m

,

xd(m) vs xd

,
xd-s vs. xd-m
Click on a term to search for related topics.

» Springfield Armory

» HGF Sponsors

Powered by vBadvanced CMPS v4.2.1