S&W problem help me out here

    Results 1 to 3 of 3
    1. #1
      Junior Member
      Join Date
      Dec 2008
      Posts
      52

      S&W problem help me out here

      I have a smith model 10-7 38 special revolver that my fiance got from her grandfather. The problem is that when loaded the cylinder wont rotate when you try to cock it. It hangs up and is difficult to swing out ater you have attempted to cock it. What is the problem here? Also does anyone know anything about these revolvers?

    2. #2
      Senior Member Baldy's Avatar
      Join Date
      Jun 2006
      Location
      Port St.John,FL.
      Posts
      6,740
      Call S&W at 1-800-331-0852 and send it back to them for repairs. It will be done and done right the first time.

    3. #3
      Member hberttmank's Avatar
      Join Date
      May 2006
      Posts
      626
      Does it only act up when loaded? Are the rounds seating all the way in the cylinder? Sounds like either your ejector rod has unscrewed or you have some debris under the extractor. This is not uncommon. First check to see if anything is under the extractor not allowing it to seat completely in the cylinder. The ejector rod will have left hand threads on this model. Put some empty cases in the cylinder to prevent damaging the extractor pins, use some leather padded pliers and check and see it the ejector rod is loose.

    Sponsored Links

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •  

    Search tags for this page

    cylinder hangs up when loaded

    ,

    handgun cylinder wont revolve

    Click on a term to search for related topics.