Results 1 to 8 of 8
  1. 01-21-2013, 12:49 AM #1
    GR00VY
    GR00VY is offline Junior Member
    Join Date
    Jan 2013
    Posts
    4

    New here with p226 rtss in 40 and some questions

    Hi all. I am new to this forum and to sig handguns. I have been shooting for many years and finally saved up my pennies for the sig I always wanted. It is all steel frame reverse two tone. I love it. Took it out shooting for the first time last week and it was great. Here she is.


    I have a couple questions and I apologize if they are stupid questions but I want to make sure everything is good to go. First I noticed when I took it home and cleaned it after shooting, I am getting a scratch under the decocker along the steel frame. 2nd, the decocker is nicking the frame when travels to its highest point when I decock the gun. Here are some pics.




    Is this normal wear and tear after initial use of the gun? Will it keep wearing more and more or will it subside.

    My final question is in regards to the ejector on the 226. I noticed they are pinned in. Mine has some play to it. You can wiggle it a bit with your finger. I talked to SIG CS who said it was normal but then happened to read a post from a sig armorer who said it should be tight. Can any confirm which is correct. Gun was made in 2011. Thanks for any help.

    GR00VY
    Reply With Quote Reply With Quote
  2. Ads
  3. 01-21-2013, 11:48 AM #2
    berettabone
    berettabone is offline Banned
    Join Date
    Jan 2012
    Location
    Wisconsin
    Posts
    1,368
    Welcome....can't say anything about your ejector, but, If your going to shoot your firearm, it's going to get scratches and dings.......my Beretta's have scratches by the decocker...normal wear and tear. My SR40 has some frame nicking above the safety, and slide release...normal, although yours looks a bit deep, if it's a new firearm.
    Reply With Quote Reply With Quote
  4. 01-21-2013, 12:23 PM #3
    GR00VY
    GR00VY is offline Junior Member
    Join Date
    Jan 2013
    Posts
    4
    Yeah it is brand new. I am aware it will get it is wear and tear marks. I just wonder how much further it will go. I thought the decocker would stop before it impacted the lip on the frame but it looks like the lip of the frame is what is stopping it. That is why I am wondering if it will keep digging into it.
    Reply With Quote Reply With Quote
  5. 01-21-2013, 12:32 PM #4
    berettabone
    berettabone is offline Banned
    Join Date
    Jan 2012
    Location
    Wisconsin
    Posts
    1,368
    It should stop eventually, but can't say for sure....it may keep digging into it.......I would contact Sig.
    Reply With Quote Reply With Quote
  6. 01-21-2013, 01:50 PM #5
    GR00VY
    GR00VY is offline Junior Member
    Join Date
    Jan 2013
    Posts
    4
    Just got off the phone with sig. They said it was normal. That if I don't ride the decocking lever up it will contact the frame when you let fly home. Oh well. Now my sig has its first battle scar.
    Reply With Quote Reply With Quote
  7. 01-21-2013, 01:53 PM #6
    berettabone
    berettabone is offline Banned
    Join Date
    Jan 2012
    Location
    Wisconsin
    Posts
    1,368
    What did they say about the ejector?
    Reply With Quote Reply With Quote
  8. 01-21-2013, 03:45 PM #7
    GR00VY
    GR00VY is offline Junior Member
    Join Date
    Jan 2013
    Posts
    4
    They said it is common and shouldn't be a problem. Some have a bit of wiggle I guess. They said since it is pinned in and pushed between the frame and other parts it can't really be adjusted. THey could try to find an ejector that is just tiny bit wider that fit better but it really isn't feasible. I found this site and at the bottom it talks about a loose ejector and how it is normal.

    rec.guns FAQ: III.C.2.q.2. SIG-Sauer

    It talks about it under the Care and Cleaning first bullet point. So I guess I am rock n rolling.
    Reply With Quote Reply With Quote
  9. 01-21-2013, 04:12 PM #8
    berettabone
    berettabone is offline Banned
    Join Date
    Jan 2012
    Location
    Wisconsin
    Posts
    1,368
    Good to go.....happy shooting.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search tags for this page

226 40 rtss
,
how to get scratches off a gun
,
loose ejector 226
,

normal wear underside of slide p226

,
p226 reverse two tone
,
sig 226 loose ejector
,
sig p226 reverse two tone
,
sig p226 rtss
,
what does the ejector part in a sig 226 look like