Results 1 to 6 of 6
  1. 12-17-2009, 11:17 PM #1
    Sledzep01's Avatar
    Sledzep01
    Sledzep01 is offline Junior Member
    Join Date
    Oct 2009
    Location
    Marietta, GA
    Posts
    10

    P238 Disassembly questions

    This is my first pistol. I love it. I also really like the ability to take it apart and clean it. I have read all I can find about the Mustang and how to disassemble it but I am apprehensive to take the next step.
    I have stripped everything except the trigger and hammer area so far.
    Has anyone here taken it down that far yet?
    Do you know if those steps will be THE SAME as the Mustang?

    Here are some pics I took over the last few days while cleaning it.

    http://sledzep.smugmug.com/Sports/Si...43671653_ok3F3


    Sled
    Reply With Quote Reply With Quote
  2. Ads
  3. 12-18-2009, 01:31 PM #2
    SaltyDog's Avatar
    SaltyDog
    SaltyDog is offline Member
    Join Date
    Jan 2009
    Location
    Ohio
    Posts
    691
    Read the manual that came with the gun - It is a P238 not a Mustang.

    If you did not get a manual go to http://www.sigsauer.com/CustomerServ...nerManual.aspx

    Also Sig has maintenance training at http://www.sigsauer.com/CustomerServ...nceGuides.aspx

    The pics look as though you have taken it down as much as is needed. If you want to clean deeper try a product like Birchwood Casey Synthetic Safe Gun Scrubber instead of disassembling the whole gun..
    Reply With Quote Reply With Quote
  4. 12-18-2009, 02:12 PM #3
    VAMarine's Avatar
    VAMarine
    VAMarine is online now Administrator
    Join Date
    Dec 2008
    Location
    Iowa
    Posts
    3,030
    Quote Originally Posted by Sledzep01 View Post
    Do you know if those steps will be THE SAME as the Mustang?

    No, given the added parts of 238's removable main spring housing, it's going to be a little different.
    Reply With Quote Reply With Quote
  5. 12-19-2009, 06:01 PM #4
    Sledzep01's Avatar
    Sledzep01
    Sledzep01 is offline Junior Member
    Join Date
    Oct 2009
    Location
    Marietta, GA
    Posts
    10
    Quote Originally Posted by SaltyDog View Post
    Read the manual that came with the gun - It is a P238 not a Mustang.

    If you did not get a manual go to http://www.sigsauer.com/CustomerServ...nerManual.aspx

    Also Sig has maintenance training at http://www.sigsauer.com/CustomerServ...nceGuides.aspx

    The pics look as though you have taken it down as much as is needed. If you want to clean deeper try a product like Birchwood Casey Synthetic Safe Gun Scrubber instead of disassembling the whole gun..
    Thnx, I have the manual and was looking for insight into how to actually take the trigger and hammer mechanisms out and then successfully put them back together.
    Since it is so close to the mustang I thought someof the Mustang owners might also have one and could share their knowledge.

    Sled
    Reply With Quote Reply With Quote
  6. 12-19-2009, 10:18 PM #5
    SaltyDog's Avatar
    SaltyDog
    SaltyDog is offline Member
    Join Date
    Jan 2009
    Location
    Ohio
    Posts
    691
    If you want to take the trigger and hammer mechanisms apart I'd suggest getting your hands on an armorers guide for the P238. Step by step instructions with photo's.

    I recently converted my Sig P229 from DAK to DA/SA and found a P226 armorers guide that worked for me.
    Reply With Quote Reply With Quote
  7. 12-20-2009, 12:02 AM #6
    Sledzep01's Avatar
    Sledzep01
    Sledzep01 is offline Junior Member
    Join Date
    Oct 2009
    Location
    Marietta, GA
    Posts
    10
    Quote Originally Posted by SaltyDog View Post
    If you want to take the trigger and hammer mechanisms apart I'd suggest getting your hands on an armorers guide for the P238. Step by step instructions with photo's.

    I recently converted my Sig P229 from DAK to DA/SA and found a P226 armorers guide that worked for me.
    Thank you for the guidance. I am looking but have not found one for the P238 yet.

    Sled
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search tags for this page

disassemble sig p238
,
how to clean a sig p238
,
how to clean a sig sauer p238
,
how to disassemble a sig p238
,
how to disassemble a sig sauer p238
,
how to disassemble sig p238
,
how to disassemble sig sauer p238
,
how to take apart a sig sauer p238
,
how to take apart sig p238
,

p238 disassembly

,
sig p238 breakdown
,

sig p238 disassembly

,
sig p238 disassembly instructions
,
sig p238 magazine disassembly
,
sig p238 takedown
,
sig sauer p238 breakdown
,

sig sauer p238 disassembly

,
sig sauer p238 magazine disassembly
,
sig sauer p238 takedown
,
taking apart a sig p238