Magazine Loading Tool For SR9C

    Results 1 to 8 of 8
    1. #1
      Junior Member metweezer's Avatar
      Join Date
      May 2010
      Location
      Port St Lucie, Florida
      Posts
      5

      Question Magazine Loading Tool For SR9C

      How does this thing work? I believe the tool comes with every new SR9 & SR9C. I guess it is supposed to make loading ammo easier. I can't figure out how it does that. I have the "Uplula" on order but the loading tool that comes with the pistol is beyond my level of expertise. Any help would be appreciated.

    2. #2
      Junior Member mesz13's Avatar
      Join Date
      Apr 2008
      Location
      Michigan
      Posts
      62

      it aint easy

      I have the same gun and purchased the lula uploader its a piece of cake, the ruger one is just difficult to use, it works you just gotta take some time and go slow. The hook on the top goes over the rear of the mag, u press down and partially slide the round in till it hooks into the mag then u can release the loader and finish pushing the round in. its not a speed loader so dont try to use it that way you will just get frustrated.

    3. #3
      Senior Member recoilguy's Avatar
      Join Date
      Apr 2009
      Location
      MN
      Posts
      1,311
      Put the loader over the top of the mag hook to the rear. Slide the device down the mag and the hook will depress the inside of the mag. Hold it there and take a 9mm bullet. with the primer to the rear slide it in until the back of the bullet hits the hook. release pressure on the loader so the hook is now above the partially loaded bullet. Push the bullet completely to the rear of the mag.....repeat.

      It is really pretty easy once you get it figured out. Not super fast but way easier on your thumb.

      RCG

    4. #4
      Junior Member metweezer's Avatar
      Join Date
      May 2010
      Location
      Port St Lucie, Florida
      Posts
      5
      Quote Originally Posted by recoilguy View Post
      Put the loader over the top of the mag hook to the rear. Slide the device down the mag and the hook will depress the inside of the mag. Hold it there and take a 9mm bullet. with the primer to the rear slide it in until the back of the bullet hits the hook. release pressure on the loader so the hook is now above the partially loaded bullet. Push the bullet completely to the rear of the mag.....repeat.

      It is really pretty easy once you get it figured out. Not super fast but way easier on your thumb.

      RCG
      Followed your advice but after 3 rounds I couldn't compress the mag spring any further (it's brand new and has never been loaded). Hopefully the Uplula will make it easier. Tks for your help.

    5. #5
      Junior Member metweezer's Avatar
      Join Date
      May 2010
      Location
      Port St Lucie, Florida
      Posts
      5

      I Got It!

      Okay I was using the tool incorrectly. Loaded all my magazines easily. Thanks again

    6. #6
      Senior Member dondavis3's Avatar
      Join Date
      Aug 2009
      Location
      Dallas / Fort Worth Texas Area
      Posts
      1,893
      I too bought a Uplula loader.

      I've got several loaders that came with my guns.

      And all tho they work, none work as well as the Uplula.

      IMHO

      Last edited by dondavis3; 07-24-2010 at 10:51 AM.

    7. #7
      Senior Member cougartex's Avatar
      Join Date
      Jan 2010
      Location
      Jefferson County, TX
      Posts
      1,775
      Uplula

    8. #8
      Leo
      Leo is offline
      Member Leo's Avatar
      Join Date
      Jul 2010
      Location
      Texas
      Posts
      113
      Yep, I bought an UpLULA 24222 and it worked great for my 9mm & .45 ACP magazines. Loading the magazines can never be easier.

    Sponsored Links

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •  

    Search tags for this page

    loading ruger sr9
    ,
    magazine loader for ruger sr9c
    ,
    ruger magazine loading tool
    ,
    ruger sr9 loading tool
    ,

    ruger sr9 magazine loader

    ,
    ruger sr9 reloading tool
    ,
    ruger sr9c loader
    ,
    ruger sr9c magazine loader
    ,
    ruger sr9c speed loader
    ,
    ruger sr9c speedloader
    ,
    ruger sr9e loading tool
    ,
    sr9 magazine loader
    Click on a term to search for related topics.