Just Bought a Tanfoglio P19L, 40 S&W, and Well...
It has problems. When I purchased it from Budsgunshop.com it said it comes with checkered walnut grips and two 14 rd magazines (which it still says as of this posting). It came with neither. The grips are polymer and the magazines only hold 12 rds. My son thinks he could force 13 rounds into the magazine but that might damage the magazine. I've contacted Bud's about this and am awaiting to see what they'll do. I also wrote a review about the gun and it still hasn't been posted to their website.
If that wasn't bad enough I took the gun to the range and ran into the problem where the round won't chamber properly. Not just occasionally but 97% of the time. At first I thought the problem was with the extractor preventing the back of the round from sliding up to a horizontal position with the back flush to the firing pin; now the round stops at an angle into the barrel. I could push the slide forward to chamber and fire the round. After firing the next round did the same thing. When I got home and told my son about the problem he looked at the gun and saw that the slide says "9x19" instead of ".40" (like my CZ P-07 says). So it looks like the slide is for a 9 MM and not a .40 S&W. (Fortunately the barrel says .40.) I contacted IFG about this and they said to send it in. I'll have to pay to send and if they determine there is a problem with the gun they'll pay to send it back; if they find no problem then I'll have to pay to get it back.
Before sending it in I'm planning on making a video of the problem and posting it to YouTube to be followed by another video when I get it back.