trying to figure out what round to use in my 1910. i know it's a 9 mil para but also read i can run 380 through it. the 380 round jams but haven't seen para available. any advice?
Printable View
trying to figure out what round to use in my 1910. i know it's a 9 mil para but also read i can run 380 through it. the 380 round jams but haven't seen para available. any advice?
If it is a Browning model 1910 made by F.N. they as far as I understand were never made in 9m/m parabellum. The were made in 9x17 m/m (.380 A.C.P.) and 7.65x17 m/m (.32 A.C.P.) If .380's are jamming I think you need to check the info. on the pistol and see if it isn't a 7.65 or .32 A.C.P. One other thing , .380 and 9m/m parabellum are not interchangable. In the 9 m/m family you will most commonly find the 9x17 (.380), 9x18 (Mak.), 9x19(also called luger, nato, and parabellum) and the 9x21. Each is a different caliber and do not play well with others.
Please explain what you mean by "jams." Explain as completely as possible.Quote:
Originally Posted by jer22
Could you possibly post a picture or two of the jam you're experiencing?
About the ammunition you're using: What, exactly, does the box say (caliber, bullet weight, muzzle velocity, manufacturer)?
In what condition is the pistol? How 'bout the magazine?
Do you have a lot of handgun-shooting experience? Sometimes that makes a difference.
Please let us know as much as you can.
after some research it looks like what i thought was a 1910 was actually a model 1955 manufactured/imported/assembled around 1968.hard to tell due to so many variations on all the european military models. all the research says it's a 380 but the barrel is clearly stamped cal 9m/m00. with some odd markings . i have no pics of the jams, and the gun is in fair shape, definately not showroom. the slide is marked browning not fn. the magazine seeems to be in good working order. i was trying to shoot federal 380 ap, 95 grain, metal case. it didn't jam all the time. just annoying when it did. haven't shot it in at least 9 mths for fear of real malfunction. sorry for the mistake on the original post. jer
OK, once again, what kind of jams?
Failures to eject?
Failures to feed?
Stovepipes?
The .380 is a 9mm. If it had been made in Europe, it would be marked something like "9mmK" or "9mmC."
steve, the shell casing hangs in the slide. won't eject every time. jer
1. Is the gun clean? Crud may be slowing the slide down, or even stopping it short.
2. Is the ejector broken or bent? If the gun is clean, the ejector is the next likely culprit.
3. Is there crud under the extractor's hook? This is a far-out possibility.
4. It is also possible that you are "limp-wristing" the gun as you fire it. This is why I asked about your pistol experience. Semi-auto pistols need to be gripped very firmly. Also you need to apply "follow-through," maintaining that firm grip even after the shot has been fired.
New pistol shooters tend to "flinch." That is, they react to the recoil impulse of the fired shot even before it has been fired. This can lead to limp-wristing at the moment of discharge.
The antidote is to carefully maintain a firm grip while slowly pressing the gun's trigger straight back, so that the gun's discharge comes as a complete surprise.
Tell me whether any of these suggestions have helped cure the problem.
thanks steve, it could be one or all of what you listed. i do have a barney fife problem with semi-autos. my experience is mostly with revolvers. i'll give it a good cleaning again and try it tomorrow. i think all the mechanical components are ok. i didn't think about it needing the proper recoil to eject. might be just operator error. thanks again. jer
I have been fortunate to have purchased a Browning 1910 or 1955 in good clean condition. It came with what I think was original magazine and it shoots great. Purchased two extra magazines off the internet and they both operated great. Soetimes I have a problem putting the slide ring on but I really enjoy it. Sorry you are having problems but it is a great conceal gun.
J
When buying an older auto pistol, it's a good idea to replace the recoil spring and other springs as needed. Try Wolff Springs and get the standard weight spring.
added: Europeans refer to the .380 ACP as the 9mm Short - or Corto or Kurtz, depending on the language. DO NOT fire 9mm Luger/Parabellum ammo in it.
mark