Results 1 to 6 of 6
  1. #1
    blue d is offline Junior Member
    Join Date
    Apr 2008
    Posts
    58

    P-11 quit ejecting

    My P-11 quit ejecting today.

    It fires the first round then retrieves the spent caseing but does not eject it.

    Have probably fired 600 trouble free rounds through this gun.

    Any ideas or suggestions?

  2. #2
    Join Date
    Jan 2008
    Location
    NC
    Posts
    244
    Might want to check & see if ejector is broken? Read that KT had a batch of bad ejectors a while back. Thought problem was solved? If you're not sure what to look for, you could do a search on KTOG. If that's it, they have instructions on how to replace it after KT sends you part. The "KT gunsmithing" sticky at top may give you a link to help you too.

  3. #3
    blue d is offline Junior Member
    Join Date
    Apr 2008
    Posts
    58
    Looks as if it is the ejecter as the extracter works and holds the retrieved caseing. Did not get to call Kel-Tec today but will next week.

    Thanks for the info and reply.

  4. #4
    blue d is offline Junior Member
    Join Date
    Apr 2008
    Posts
    58
    My problem was the ejector.

    Called Kel-Tec on Monday and had it in hand Thursday. Got on KTOG for information as how to replace it.

    Drove out one pin, swapped piece and drove pin back in.

    Ran 20 rounds through it for good measure and all works fine.

    Great service from Kel-Tec, good directions from KTOG and good advice from this forum.

    Thanks.

  5. #5
    Join Date
    Jan 2008
    Location
    NC
    Posts
    244

  6. #6
    JeffWard's Avatar
    JeffWard is offline Senior Member
    Join Date
    Aug 2007
    Location
    St Pete Beach, FL
    Posts
    1,932
    Damn... I got in late...

    "Check your ejector, KelTec will send you one free..." LOL

    Enjoy

    Jeff

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •