Results 1 to 12 of 12
  1. #1
    fattsgalore's Avatar
    fattsgalore is offline Junior Member
    Join Date
    Jan 2007
    Posts
    86

    Glock Detail stripping!!!!!!!

    Watch me!!!!!
    http://www.youtube.com/watch?v=SGUKu...elated&search=
    I just wish they discussed reassembly. Enjoy you Glockaholics.



    Can one of you moderators move this to the Glock portion. I got gung-ho when i posted and obviously posted in the wrong spot.
    Thank you.

  2. #2
    jwkimber45's Avatar
    jwkimber45 is offline Senior Member
    Join Date
    May 2006
    Location
    Indiana
    Posts
    1,818
    Thats a slick little vid.

  3. #3
    Lawnman380's Avatar
    Lawnman380 is offline Supporting Member
    Join Date
    Feb 2007
    Location
    North Port Florida
    Posts
    67
    Well Done!!!!

  4. #4
    Join Date
    Dec 2006
    Location
    Los Angeles, CA
    Posts
    469
    My personal opinion:

    I don't encourage the use of a hammer/mallet to remove the 3 pins. Also, the pins should be removed from left to right, not the other way around.

  5. #5
    HotRod9mm's Avatar
    HotRod9mm is offline Junior Member
    Join Date
    Jan 2007
    Posts
    30
    Quote Originally Posted by GlockamaniaŽ View Post
    My personal opinion:

    I don't encourage the use of a hammer/mallet to remove the 3 pins. Also, the pins should be removed from left to right, not the other way around.
    You have no idea how many pins and bent slide stop levers I have replaced because of that video. Removing the pins from right to left does not matter except for the trigger pin and that is only because of the two grooves for the slide stop lever. You NEVER use a mallet, hammer or anything else to pound the pins out of the receiver.

  6. #6
    fattsgalore's Avatar
    fattsgalore is offline Junior Member
    Join Date
    Jan 2007
    Posts
    86
    I wont be messing with the frame but a detail stipping of the slide is in the definate future. Anything I should be weary of???

    After about 2000 rounds it's gonna get the love it deserves. At 1300 so it'll be some time.

  7. #7
    duck!'s Avatar
    duck! is offline Junior Member
    Join Date
    Jan 2007
    Posts
    22
    Anybody can replace the internal parts of a Glock. My daughter can disassemble and then reassemble in a total of 7 minutes. The video should be removed from this site! It is incorrect to use a hammer. The trigger pin should be gently pushed from the left while moving the slide stop lever back and forth. Once the slide stop comes off the pin, it will move the rest of the way with no effort.

    If you are uncertain about how to do the detail strip, get a copy of Ptooma Complete Glock Reference Guide. It gives complete photo-documented instructions on disassembly and reassembly. If you have any other questions, just ask them on this site.

  8. #8
    JOMJ87 is offline Junior Member
    Join Date
    Jun 2007
    Posts
    7
    Here is a better video i have found

    http://www.youtube.com/watch?v=No4SA...elated&search=

    Cole

  9. #9
    steve24's Avatar
    steve24 is offline Junior Member
    Join Date
    Jul 2007
    Posts
    13
    Quote Originally Posted by JOMJ87 View Post
    Here is a better video i have found

    http://www.youtube.com/watch?v=No4SA...elated&search=

    Cole
    +1

    This is a MUCH better video.

  10. #10
    JimmySays's Avatar
    JimmySays is offline Supporting Member
    Join Date
    Jun 2007
    Location
    Spring, Texas
    Posts
    517
    Quote Originally Posted by GlockamaniaŽ View Post
    Also, the pins should be removed from left to right, not the other way around.
    Removed from left to right, and reinstalled from right to left. The Complete Glock Reference Guide has detailed instructions plus photos. Also torture test and such. Everything you wanted to know about a Glock, but were afraid to ask. It is worth the 30 bucks. My opinion.

  11. #11
    hue001t is offline Junior Member
    Join Date
    Apr 2010
    Location
    jacksonville NC/middletown CT
    Posts
    2
    ...

  12. #12
    Glock Doctor is offline Banned
    Join Date
    Mar 2011
    Location
    Penn's Woods
    Posts
    494
    Everything written out here is 100% correct. (No pretty pictures, though, so you've got to be literate!)

    DISASSEMBLY: PART ONE: How To Completely Disassemble A Glock Pistol - Glock Talk
    REASSEMBLY: PART TWO: How To Reassemble A Completely Broken-Down Glock - Glock Talk

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

detail stripping glock
,
detail stripping glock slide
,

glock detail strip

,
glock detail strip slide
,
glock detail stripping
,
glock pin left to right
,
how to change the pins in a glock
,
how to detail strip glock 22
,
how to remove and replace glock pins
,
how to replace pins on glock
,
stripping a glock
,
video removing glock pins
Click on a term to search for related topics.