Okay i'm gonna try and sum this up. I purchased an Sig p250 not even a year ago, the gun has worked flawless the only issue was that my sights was not centered correctly. So I called Sig they told me to send it to them, I did when I got it back they let me know during fixing the sights the slide broke so they had to replace my slide. Now when I put one in the chamber the slide is very hard to pull back, I thought it was do to the slide being new but when I go to pull the slide back to clear the round in the chamber, the bullet doesn't come out the slide but instead falls through the handle where my magazine goes I never had this issue before until I got my gun back from Sig. I purchased a new magazine today when I used that magazine my slide goes back very smooth to chamber a round. When I pull the slide back to clear the bullet 80% of the time it ejects from the slide but 20% falls through the handle. Like I said never had this issue until I got it back. The gun only has at least 300 bullets through it. Any answers to this issue will be appreciated. Thanks in advance