FEG PA 63 Decocker issues
I have a PA-63 that will not allow the decocker to engage. It just will not let you thumb down the thing. Never had this problem before. Anyone have any advicee? If I pull the hammer back just a hair and push down on the decocker it works fine. I'm at a loss.
Not the trigger bar spring
I just checked, the trigger bar spring is engaged with the trigger bar, so that is not the issue. When I rack the slide, the hammer stays back. When I shoot the gun, the hammer goes forward every shot but does not contact the firing pin. So, essentially this gun will shoot only double action every shot.
Originally Posted by 83v45magna