Results 1 to 2 of 2
  1. 04-22-2007, 04:14 PM #1
    DACP-KS's Avatar
    DACP-KS
    DACP-KS is offline Junior Member
    Join Date
    Mar 2007
    Posts
    5

    XD 45 ACP HELP! With reassembly of the magazine catch assembly PLEASE..

    Need tips or resources for the reassembly process. I've replaced a mag release and had the misfortune of letting the spring lose. I had to completely remove the magazine catch assembly now having problems reassembling. Any tips or past feedback, videos etc..

    Tanx
    Reply With Quote Reply With Quote
  2. Ads
  3. 05-04-2007, 04:17 PM #2
    TOF's Avatar
    TOF
    TOF is offline Senior Member
    Join Date
    Sep 2006
    Location
    Northern Arizona
    Posts
    3,007
    Take a drill or rod of the same diameter as the pin you removed (Mag Release) and cut it to a length which will hold all parts together and still slip into position within the grip frame (slave pin). Bevel ends of slave pin. Push the Mag release in to position while holding the assembly in place. The slave pin should slip out and Mag release in.

    Good luck.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search tags for this page

assemble xd 45
,
dummy pins xd reassemble
,

how to assemble/reassemble 45 acp

,
how to reassemble a 45 acp clip
,
how to reassemble xd 45 magazine
,
how to remove clip from xd45
,
how to remove magazine release on a xd
,
how to replace the magazine release on a xd 45
,

how to take out xd magazine release

,
release pin xd 45
,
replacing mag release spring and xd pistol
,
replacing the magazine release on an xd
,
xd 45 replace mag release
,
xd mag catch assembly
,
xd mag release spring
,

xd magazine catch

,
xd magazine release reassemble
,

xd slave pins

,
xd.45 magazine catch spring
,
xd9 magazine release spring