Results 1 to 6 of 6
  1. #1
    Bob Wright's Avatar
    Bob Wright is online now Senior Member
    Join Date
    May 2006
    Location
    Memphis TN
    Posts
    1,544

    My Cleaning Routine...........

    First of all, I keep a pretty well stocked cleaning kit on hand. I keep flannel patches, 2 1/4" square, on hand, a thousand or so. Also two swivel cleaning rods and two fixed, slotted rods. Also stainless steel and fiber bore brushes of various caliber, jags and small bottles of oil and Hoppe's solvent, and WD-40. I buy Hoppe's in quarts which last nearly a year, and pour out enough to fill the 3 oz. bottle in my kit.

    Upon returning from the range, spread out the cleaning mat on my workbench and take out the guns from their cases. Re-check to clear, and either remove the cylinder (from Single Actions) or swing it out (on double actions).
    Using a jag one caliber smaller than bore diameter, run a patch soaked in Hoppe's up and down the bore a few times. Then, using a slotted non-rotation rod, coat each chamber with Hoppe's. Run an oversized brush through each chamber, and dry with dry patches. Clean out the bore using corect size jag this time, with dry patches. If leading appears, use a lead removing patch. After chambers and bore are clean and dry, spray entire gun down with WD-40, and wipe dry with paper towels. (I use those blue shop towels from AutoZone.) Now lightly oil the chambers and bore. Heavily oil exterior of gun, and place one drop into action. Reassemble, or close cylinder. The gun is now too oily. Wipe down with another paper towel, rotate cylinder to remove excess oil on it.

    That's it. Every six months or so, rub a little linseed oil on the stocks and let that dry before replacing in the case.

    Most of my guns are in exces of ten years old, many pushing thirty years, and one nearing fifty years old. All show no signs of excess wear and functioning is near perfect as a mechanical device can be.

    Bob Wright

  2. #2
    Baldy's Avatar
    Baldy is offline Senior Member
    Join Date
    Jun 2006
    Location
    Port St.John,FL.
    Posts
    6,741
    Makes sence to me. I do about the same. Only difference is quit using WD-40 and use clp spray. 6-30yrs, 1-50yrs, and 1-100yrs and the rest are fairly new. The older two show their age. All the rest look new.

  3. #3
    j.d. Guest
    Their are a lot of cleaning/protect-ant products out their.

    I just use Hoppes#9, Lead Away (gun cloth), and a silicon gun cloth (final wipe).
    Hoppes oil, for areas at times needs oiling.

    I have a stainless steel revolver

  4. #4
    P97
    P97 is offline Member
    Join Date
    May 2006
    Location
    Oklahoma
    Posts
    663
    On my KP97DC I spray Eezox about once a month, and then run a boresnake through it after I shoot it. I do this about every 3 months on my guns that I don't use often, and on my CCW in the winter when I don't sweat a lot. All my guns look brand new.

  5. #5
    j.d. Guest
    Can you post a link to the mentioned product? If I can't purchase it locally. I have heard of this product. But have not seen it around.

  6. #6
    Dustoff '68 Guest
    I have eliminated all the tried and proven steps....I use Gunzilla now...does it all...cleans, removes stains, lubes....works for me.

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» Springfield Armory

» HGF Sponsors

Powered by vBadvanced CMPS v4.2.1