Results 1 to 9 of 9

Thread: Help ME GUYS!!!

  1. #1
    wickedXD Guest

    Help ME GUYS!!!

    Ok so I got that Mossberg 500A with the mag tube that goes to the end of the barrel...It should have 8 or 9 shell capacity...but I can only put 5 shells in it and it stops me from loading more? I don't get it...it was a used gun...did maybe he put a plug in it? if so how do i take it out???

    any help at all guys would be great..thanks.

  2. #2
    Shipwreck's Avatar
    Shipwreck is offline HGF Forum Moderator
    Join Date
    Jan 2006
    Location
    Beretta City, Texas
    Posts
    10,823
    There must be a plug in it maybe? Or, did you lay out more than 8 shells next to the gun to see how the spacing is? (to see if it would fit 8). If it goes to the end of the barrel, then it should hold more than 5.

  3. #3
    Rustycompass's Avatar
    Rustycompass is offline Senior Member
    Join Date
    Jun 2006
    Location
    Pawley's Island
    Posts
    1,126
    Quote Originally Posted by wickedXD View Post
    Ok so I got that Mossberg 500A with the mag tube that goes to the end of the barrel...It should have 8 or 9 shell capacity...but I can only put 5 shells in it and it stops me from loading more? I don't get it...it was a used gun...did maybe he put a plug in it? if so how do i take it out???

    any help at all guys would be great..thanks.
    No problem at all... I have the same scatter gun....

    ~ there's a small wooden dowel inside the mag tube. It's easy to get out.

    1. CLEAR the gun... empty the gun... unload the gun... :smt003
    2. you should be able to do this by hand
    3. unscrew the cap at the end of the mag tube that's under the barrel...
    4. slide the mag tube over so that you can see the threads where the cap screw was...
    5. point the gun to the floor & shake for a second & the dowel should just fall right out of the end of the mag tube & BANG it's that simple REALLY your good to go...

  4. #4
    wickedXD Guest
    yeah from what I know it should hold 8-9 shells...definetley...but i took the end cap off the mag tube and I cant access the plug if there is one...need some help here if someone has a Mossy

  5. #5
    wickedXD Guest
    Rusty YOU KICK ASS!!! thanks a ton man! came right out. there were to rubber rings on the dowel...i don't need to worry about those right?

  6. #6
    Rustycompass's Avatar
    Rustycompass is offline Senior Member
    Join Date
    Jun 2006
    Location
    Pawley's Island
    Posts
    1,126
    Quote Originally Posted by wickedXD View Post
    Rusty YOU KICK ASS!!! thanks a ton man! came right out. there were to rubber rings on the dowel...i don't need to worry about those right?
    no ya don't need them..... they're just buffers... now your good to go.
    Glad to help........

  7. #7
    wickedXD Guest
    Sweet!

  8. #8
    Baldy's Avatar
    Baldy is offline Senior Member
    Join Date
    Jun 2006
    Location
    Port St.John,FL.
    Posts
    6,741

    Talking Mossey..

    Rusty you Da Man!!!

  9. #9
    L8models's Avatar
    L8models is offline Member
    Join Date
    May 2006
    Location
    North Carolina
    Posts
    254
    Another satisfied customer

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •