Results 1 to 2 of 2
  1. 03-01-2007, 02:52 PM #1
    ditrina's Avatar
    ditrina
    ditrina is offline Junior Member
    Join Date
    Dec 2006
    Location
    Sunny Central Florida
    Posts
    6

    Colt 22 feeding problem

    Hello all,
    Well I picked up that Stainless Steel Colt 22, did a thorough cleaning ( Not that dirty to begin with ) lightly oiled the gun and cleaned the 10 round magazines.
    Loaded the mags. and proceded to pull back the slide and release.. The gun would only feed the round about up to the case, it's as if the feed ramp was to steep and the round would get caught at a sharp angle.. I've discribed this as best as I could.. By the way if I "Tapped" the slide it would then chamber the round. Any ideas or suggestions?? I have no problem taking it to a qualified gunsmith or contacting Colt, but I thought I would try here first.
    Thanks
    Reply With Quote Reply With Quote
  2. Ads
  3. 03-01-2007, 03:08 PM #2
    Baldy's Avatar
    Baldy
    Baldy is offline Senior Member
    Join Date
    Jun 2006
    Location
    Port St.John,FL.
    Posts
    6,741
    I hope not but you may have bought some wannabe gun smiths screw up. If he was big into the fluff and buff and didn't know what he was doing your in trouble. I would call Colt and see what they say. If I had to I would take it to a real gun smith for repair or. If I had to have a new barrel and all I would send it to Colt. Good luck your going to need it.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search tags for this page

colt 22 feeding problems
,
colt 22 stainless
,
colt 22lr feeding problem
,
feeding problems with colt juiner
,
feeding problems with junior colt 22
,
how to solve the feeding problem of a colt .22 rimfire rifle
,

junior colt feed problems