bersa thunder nickel grip screw HELP!!!!!!

    Results 1 to 12 of 12
    1. #1
      Junior Member
      Join Date
      Aug 2013
      Posts
      5

      bersa thunder nickel grip screw HELP!!!!!!

      My blk with nickel accents bersa thunder recently dropped at grip screw and is go, just after a mere 200 roundes. Screw is out of stock at bersa and most online places I see. Ordered one from brownells and was wrong screw. I believe I ordered wrong one and they acutaully don't appear to have it. The I think part number is tp22t3n. Any idea what I can do? I need asap for my wife's ccw class and the damn grip is falling off.

    2. #2
      Member shaolin's Avatar
      Join Date
      Dec 2012
      Posts
      632
      Grip Screw Nickel I am not sure if this link is what you need but it looks close to what you want

    3. #3
      Junior Member
      Join Date
      Aug 2013
      Posts
      5
      thanks for ur help but I don't see link sir .......

    4. #4
      Senior Member Steve M1911A1's Avatar
      Join Date
      Feb 2008
      Location
      Northwest Washington State
      Posts
      7,465
      Worst case, temporarily wrap the grip in place with duck tape. Wrap it tightly.

    5. #5
      Member shaolin's Avatar
      Join Date
      Dec 2012
      Posts
      632
      Quote Originally Posted by hooks742010 View Post
      thanks for ur help but I don't see link sir .......
      Put your mouse on Grip Screw Nickel and click... those three words are the link

    6. #6
      Junior Member
      Join Date
      Aug 2013
      Posts
      5
      Quote Originally Posted by shaolin View Post
      Put your mouse on Grip Screw Nickel and click... those three words are the link
      Thank u again for y'all help. That's the screw I ordered but turns out its nit correct doesn't even fit bersa but it does come up when searching part number. Which seems stupid if its nit correct . So i have a 20$ screw that won't fit .

    7. #7
      Junior Member
      Join Date
      Jul 2013
      Posts
      12
      When you get the screw, use locktite from Home Depot for securing screws next time. Put it on the screw only, let dry, then screw it in. It will hold fine w/ regular tension and will stay put until you want it out.
      -
      If you use duct tape, use seran wrap first so you don't get the glue on the grip.

    8. #8
      pic
      pic is offline
      Supporting Member HGF Gold Member

      Join Date
      Nov 2009
      Posts
      3,156
      Is the screw you ordered n received to big ? or to small ?.
      Losing the first screw might indicate the internal threads on the frame need to be looked at.

    9. #9
      SP3
      SP3 is offline
      Member SP3's Avatar
      Join Date
      Nov 2009
      Location
      Canton, Ohio
      Posts
      134
      "Losing the first screw might indicate the internal threads on the frame need to be looked at."

      Not likely with a new one (200 rounds from new it sounds). We nearly lost one before 100 rounds from my wife's Thunder. No thread locking on the screws from the factory. Tiny drop of Loctite 222 or 242 - no more problems.

    10. #10
      pic
      pic is offline
      Supporting Member HGF Gold Member

      Join Date
      Nov 2009
      Posts
      3,156
      Quote Originally Posted by SP3 View Post
      "Losing the first screw might indicate the internal threads on the frame need to be looked at."

      Not likely with a new one (200 rounds from new it sounds). We nearly lost one before 100 rounds from my wife's Thunder. No thread locking on the screws from the factory. Tiny drop of Loctite 222 or 242 - no more problems.
      Loctite is a nice product, My concern was he ordered a new screw with the proper order # and it still would not fit. Probably wrong size screw.
      You could always take out the screw in opposite side cover and check the fit to the thread.
      Maybe take that good screw and try to find a match at a few hardware stores. The length could be cut, but the thread has to match perfectly, the head could be off a little .
      Of course this is temporary until you get the correct nickel screw

    11. #11
      pic
      pic is offline
      Supporting Member HGF Gold Member

      Join Date
      Nov 2009
      Posts
      3,156
      Quote Originally Posted by kaboooom View Post
      When you get the screw, use locktite from Home Depot for securing screws next time. Put it on the screw only, let dry, then screw it in. It will hold fine w/ regular tension and will stay put until you want it out.
      -
      If you use duct tape, use seran wrap first so you don't get the glue on the grip.
      I never waited for the Loctite to dry before I screwed in the screw. I have always screwed the piece in wet. Is this a new Loctite product that needs to dry first

    12. #12
      SP3
      SP3 is offline
      Member SP3's Avatar
      Join Date
      Nov 2009
      Location
      Canton, Ohio
      Posts
      134
      Quote Originally Posted by pic View Post
      Loctite is a nice product, My concern was he ordered a new screw with the proper order # and it still would not fit. Probably wrong size screw. You could always take out the screw in opposite side cover and check the fit to the thread.
      He's already determined it's the wrong size. But, he's not yet said if it's too big or too small. I assumed too big. Your suggestion is a good one and will eliminate all doubt.


      Quote Originally Posted by pic View Post
      Maybe take that good screw and try to find a match at a few hardware stores. The length could be cut, but the thread has to match perfectly, the head could be off a little. Of course this is temporary until you get the correct nickel screw
      Another good suggestion. They won't have the correct one but will at least get the gun back in service until one is obtained.


      Quote Originally Posted by pic View Post
      I never waited for the Loctite to dry before I screwed in the screw. I have always screwed the piece in wet. Is this a new Loctite product that needs to dry first
      That one threw me, too. Every thread locking fluid I've ever used (Loctite, Permatex, etc. - used to work on racecars for a living so I've used LOTS of it) was meant to be applied and then screwed in and tightened without any waiting. They are anaerobic (cure in the absence of air).

    Sponsored Links

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •  

    Search tags for this page

    bersa grip screw thread
    ,

    bersa grip screws

    ,
    bersa gun screws
    ,
    bersa nickel
    ,

    bersa thunder 380 grip screw

    ,
    bersa thunder 380 grip screw size
    ,

    bersa thunder 380 grip screws

    ,
    locktite for bersa grip screws
    ,
    ordered vx grip screws got wrong ones
    ,
    windage screw for bersa thunder
    Click on a term to search for related topics.