Originally Posted by johnboy088

Does anybody have parts or know where to get the magazine release mechanism
I recently purchased this pistol from a friend for 100$.(see here)
https://sphotos-a.xx.fbcdn.net/hphot...25554519_n.jpg The Magazine was broken, and the spring kept popping out etc... i took the magazine to my local gun shop they fixed it for 5$. Now that i got that fixed I realized that the magazine will not stay in the gun. So I looked at pictures of other 70S and I noticed mine is missing the magazine release on the left grip (see here) https://sphotos-b.xx.fbcdn.net/hphot...70673961_n.jpg



https://sphotos-a.xx.fbcdn.net/hphot...25554519_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...70673961_n.jpg

<br>How do I go about getting the parts i need to fix this problem, without spending too much money, or how do I remedy this effectively?

Plz respond need help!!1

Jack First Gunshop - First in Gun Parts - Rapid City, South Dakota

TRY THIS!

the "garcia" doesnt apprear to have very many parts currently available BUT it does have a similar magazine release system as the 70 puma and the m 1951.... as both these are .380/9mm you might be able to use parts from them with very little effort.

Numrich Gun Parts Corporation is where i buy most of my parts

Could try the Beretta forum......

Originally Posted by berettabone

Could try the Beretta forum......

Beat me too it!

johnboy, PLEASE STOP YELLING!

You woke me up!

Thx:TedDeBearFrmHell's Avatar
Okay so I went to that site you recommended and i didnt see the parts for my Beretta but i found parts for the Beretta 70 Puma (same damn gun) almost identical weapon, so Im hoping someone on here knows if these parts are interchangeable, or can i modify them to make it work? Like I said i just have a hole in my grip, and I can still fire the gun, i just have to hold the mag in (WHICH RISKS JAMMING) so do you know, or know someone who knows yoyu can ask...
thx
Has anybody successfully done this before?

Duck tape: The ultimate magazine catch!

Originally Posted by johnboy088

Does anybody have parts or know where to get the magazine release mechanism
I recently purchased this pistol from a friend for 100$.(see here)
https://sphotos-a.xx.fbcdn.net/hphot...25554519_n.jpg The Magazine was broken, and the spring kept popping out etc... i took the magazine to my local gun shop they fixed it for 5$. Now that i got that fixed I realized that the magazine will not stay in the gun. So I looked at pictures of other 70S and I noticed mine is missing the magazine release on the left grip (see here) https://sphotos-b.xx.fbcdn.net/hphot...70673961_n.jpg



https://sphotos-a.xx.fbcdn.net/hphot...25554519_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...70673961_n.jpg

<br>How do I go about getting the parts i need to fix this problem, without spending too much money, or how do I remedy this effectively?

Plz respond need help!!1

Try GunBroker.com

Beretta Model 70 Magazine Catch Assembly - 32acp : Other Pistol Accessories & Parts at GunBroker.com