Results 1 to 9 of 9
  1. #1
    FullClip's Avatar
    FullClip is offline Junior Member
    Join Date
    Mar 2009
    Location
    SRQ FL
    Posts
    5

    Issue with 90-Two Mag Need Help

    So instead of writing about it I will just post pics.





    It does this only with this Mag and it will do it for every round in the Mag.
    Anyway to fix this?
    Or do i need to order another Mag?
    Where would I get them from?
    Thanks for the help.

  2. #2
    bruce333's Avatar
    bruce333 is offline HGF Forum Moderator
    Join Date
    Aug 2006
    Location
    Wilson's Mills, NC
    Posts
    2,496
    The only thing I can think of is the follower is in backwards or broken. Does the follower look the same as the other magazines when they are all empty?
    Bruce, Life Member: NRA, NCRPA, GRNC, GOA

    Naval Air Museum Barbers Point

    "I personally think we developed language because of our deep inner need to complain."--Jane Wagner
    "The saddest aspect of life right now is that science gathers knowledge faster than society gathers wisdom."
    -Isaac Asimov

  3. #3
    Bullseye is offline Junior Member
    Join Date
    May 2007
    Location
    Florida
    Posts
    72
    I agree with Bruce, especially if all the rounds get pushed up at that angle. You can get new mags at Midway, but their not cheap. Here's the link. http://www.midwayusa.com/viewproduct...m_campaign=655
    Or here at BerettaUSA for about $5.00 bucks less https://www.berettausa.com/e2wShoppi...336:3100001452

  4. #4
    Bullseye is offline Junior Member
    Join Date
    May 2007
    Location
    Florida
    Posts
    72
    I've never taken apart my 90-two mags, but I just took a look at one of mine and it dosen't look like follower will fit in the mag backwards because of the indentation that runs along the side of the mag. The follower is notched to run in the groove of the notch. If it is in backwards, it must have been forced in there. The follower might be broken.

  5. #5
    FullClip's Avatar
    FullClip is offline Junior Member
    Join Date
    Mar 2009
    Location
    SRQ FL
    Posts
    5
    Should it be lightly oiled?

  6. #6
    Bullseye is offline Junior Member
    Join Date
    May 2007
    Location
    Florida
    Posts
    72
    Can you post a photo of the end of the mag empty?

  7. #7
    kev74's Avatar
    kev74 is offline Member
    Join Date
    Mar 2008
    Location
    Orange County, NY
    Posts
    985
    It looks like the front of the mag where the nose of the bullet rides might have gotten pushed in or dented a little bit causing top round in the stack to hang up. Can you compare this mag to one that works well and see if there are any visible diferences?

  8. #8
    DevilsJohnson is offline Senior Member
    Join Date
    Oct 2007
    Location
    Kentucky
    Posts
    3,373
    Does look like the follower might be bas akward. Hard telling with it full though.


  9. #9
    FullClip's Avatar
    FullClip is offline Junior Member
    Join Date
    Mar 2009
    Location
    SRQ FL
    Posts
    5
    Well I changed out the internals of the Magazine and it seems to be an issue with the housing of the magazine. I do not see any dents dings or anything wrong.
    I guess I will just have to man up and buy a few more.

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» Springfield Armory

» HGF Sponsors

Powered by vBadvanced CMPS v4.2.1