Right safety lever spring pin

    Results 1 to 3 of 3
    1. #1
      Member
      Join Date
      Apr 2008
      Posts
      236

      Right safety lever spring pin

      I went through and replaced a bunch of springs on my 96FS. I was tapping the two pins that go into the decocking/safety lever on the left hand side into place and it seems like I warped them; I wasn't using the proper 1/16 punch. They will gradually wiggle out of place every time the slide is racked back and forth. I need to get two of these pins replaced, they are listed as number 63 - Right Safety Lever Spring Pin in the back of our manuals.

      Is anyone aware of where I can get these little pins? I've searched online for 30+ minutes and I can't find them anywhere, Beretta USA is out of stock too.

    2. #2
      Junior Member
      Join Date
      Feb 2009
      Location
      central VT
      Posts
      51
      You'll probably have to go through a gunsmith and/or get some pin stock the same diameter!

    3. #3
      Member
      Join Date
      Apr 2008
      Posts
      236
      I ended up buying them from a member over at Beretta forums, also got a 1/16 inch punch at ACE. Hopefully I didnt widen the holes on the decocking lever too much when I was tapping away in there.

    Sponsored Links

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •  

    Search tags for this page

    beretta right safety lever

    ,

    beretta right side safety pin

    Click on a term to search for related topics.