Is there a way to shorten the trigger pull on a 92? I'm going to be poking around changing springs to lighten the trigger pull, and it'd be great to be able to reduce the pull a bit. Overtrvel isn't bad, but could be tightened up a tiny bit.
thanks
Printable View
Is there a way to shorten the trigger pull on a 92? I'm going to be poking around changing springs to lighten the trigger pull, and it'd be great to be able to reduce the pull a bit. Overtrvel isn't bad, but could be tightened up a tiny bit.
thanks
Armen - Just wanted to point out that you posted that same question in the general Beretta area a few days ago. There were 2 answers for you. At the following link:
http://www.berettagunforum.com/viewtopic.php?t=296
There is always a way... if given enough time and money. But, there is no practical way within reason. The best you can do is a). replace the mainspring with a lighter weight spring, and b). polish the friction points lightly to smooth it out.
Wolff Gun Springs sells these springs in different weights so you can experiment. My first time polishing the sear/hammer friction points I actually made it too smooth and the single action shots were like a hair trigger. I had to replace the hammer and start over.